Garage Door Springs

The spring on the garage door can break and, when it breaks, a professional garage door technician should be called to replace it. Garage doors use two different types of springs: tension and extension. When a garage door’s tension springs break, the process to fix the broken springs is difficult and can also be very dangerous for both the amateur and the professional. The reason the tension springs are dangerous to replace is because the springs are under constant tension. Because of the tension, if a mistake is made or if an incorrect tool is used to fix the springs, the person fixing the springs could face serious injury, possibly lose his limb or even his life.

garage door spring repair billings mt

The springs are still dangerous for a professional garage door technician to replace. When a technician replaces the broken springs, he has to assume that the tension springs will break when he unwinds them. He will need to wear a set of safety glasses and keep his clothes and body parts well away from the springs. A component of the garage door called the winding cone keeps the tension spring in place. These cones can slip or even explode into many pieces and great care should be taken to prevent possible injury.

garage door spring repair billings mt

Extension springs, are built differently then tension springs, because these springs are held into place by safety cables. These cables help to control the broken spring, but even though it is in place for a safety precaution, the springs are still held up under a tremendous amount of pressure and a professional technician should probably be called in the event that one breaks.

Diagnosing a garage door spring problem is simple: does the door open and close smoothly? If the door is not operating smoothly, it is likely the tension springs. If the door is making noise, turn off the garage door opener and try open the garage door manually. If the garage door still makes noise the problem is likely the springs. It is also possible that a noisy garage door may just need some lubricant to be applied to the springs. The average home can easily diagnose and fix these simple problems with a garage doors springs, but even the most seasoned DIY’er should probably allow a garage door technician to fix the garage door spring when it breaks..

Garage Door Opener Maintenance

Garage Door Maintenance Billings MT

Like any major appliance in the home the garage door and the garage door opener should be regularly maintained to prevent poor service or possible failure. To begin maintenance, tell everyone in the home your plan to work on the garage door or opener to prevent any possible injury. The first step to garage door maintenance is simple: stand inside the garage with the garage door closed; inspect the springs, rollers, pulleys and all of the mounting hardware for both the garage door and the opener. If there are any signs of damage or noticeable wear to these components, it may be time to call your garage door professional to replace the damaged or worn components (Remember garage doors are held up under a lot of tension, and a trained professional should be called to replace damaged hardware to prevent any possible injury to the homeowner).

The balance of the garage door should also be regularly checked to ensure the garage door is opening and closing with no resistance along its track. With the garage door closed, disconnect the automatic door opener, and, with the automatic door opener disconnected, lift the garage door manually into an open position. If the door moves smoothly and freely into the upward position, the door is in alignment. If, however, the door catches and drags on the rails, a trained garage door technician should properly service the door.

The garage door’s reversing mechanism – devices which have been added to all garage doors built after 1993 and are responsible for the prevention of the possible entrapment of a person under the garage door – should also be tested regularly. To test the door’s reversing mechanism, open the garage door and place a two by four on the garage floor directly in the path of the garage door. With the two by four in place, close the garage door onto it. When the garage door falls on the two by four and makes contact, the garage door should retreat back up on the track into the open position. If the door does not immediately retract, call your garage door service technician to fix the reversing mechanism.

On a final note, a small amount of lubrication can be added to all of the garage doors moving parts. Make sure that the garage door is either in a fully opened or closed position while working on the garage door, and stand clear of the garage door and all of the moving parts when the garage door is activated.

Why You May Need A New Garage Door

While a new garage door may not seem like a wise investment for your home (your garage door works just fine and if its not broke why fix it right?) and the new doors being built today, at least on the outside, appear to look just like your old trusty garage door; take a closer look, because they are much more improved. For instance, today’s garage doors, at least most models, are made of steel, and that steel is backed by high rigid foam insulation. This means that these new doors are considerably better insulating then their predecessors. Most new garage doors also have a baked on primer and polyester topcoat, and, while those terms seem like industry jargon to the average homeowner, the terms mean that the garage doors that are coated in these materials will have a great amount of rust protection.

garage doors billings mt

If in your home you have a room above the garage, and many of today’s newly constructed homes do include a room above the garage, an insulated garage door makes perfect sense. A well insulated steel door will both help keep out the cold, and, because of the doors rigidity, it will have considerably less vibration when the door is raised or lowered.

Safety is another issue with garage doors, especially in homes where children are at play, running in and out of the garage. Legislation backed by the federal government requires all new garage doors to include safety additions like an automatic reverse. The automatic reverse functions exactly as it sounds: if something comes in contact with the edge of the garage door, then the door will quit its decent downwards and retract back up into the track. Also, new doors are equipped with a laser eye system, and this system, which is comprised of two small boxes placed on either side of the garage door that emit a light beam between them, to send a closing garage door back up into the tracks when the beam of light is broken.

Also, the newer garage doors, with their numerous designs, add significant curb appeal to any home. Newer window treatments for garage doors, for the homeowner who wants to add them, also add significant style to the home.

Garage Door Tune Up Billings MT

Your garage door is probably the single largest moving object in your home. An automatic garage door opener will literally do all the heavy lifting for you when it comes to your garage door, but like all mechanical devices it requires regular maintenance if it is going to keep working like it should. The average garage door will move up and down over a thousand times a year, and that kind of usage will put significant wear and tear on anything.

A garage door should receive a tune-up at least once a year, and although that seems like a difficult task it becomes easier as long as you follow these simple steps.

garage door repair billings mt

Look for Problem Spots
The first step in your garage door tune-up is to look for any obvious problem spots in your garage door system. Rollers should be in working order, the seal around the door should be pliable and the door itself should not be dented or warped. Any parts that are overly worn or damaged should be replaced.

It is also important to disconnect the power to the garage door opener before looking over your garage door system. The last thing you want is to have your garage door to open while you’re working.

Lubricate the Roller
If you have metal rollers, they can be easily lubricated with WD-40. If you have vinyl or rubber rollers, you will have to use another lubricant since WD-40 can damage non-metal components.

garage door repair billings mt

Re-Align Locking Bars
Misaligned locking bars are common and can prevent the garage door from sliding into the slots on the door track and locking into place. If the locking bars are misaligned, loosen the screws on the guide brackets that hold the locking bars in place and tap them gently into place with a hammer until they are aligned with the slots. Tighten the screws when you’re finished.

Inspect and Clean Moving Parts
Your garage door has several moving parts, which is why it is subject to so much wear and tear. Loose bolts and screws will all need to be tightened, and any gummy parts will need to be removed and soaked in mineral spirits. To make sure all parts that are removed are put back in the right place, try to only remove one part at a time.

Lubricate Chains and Springs
The chains of a garage door system can be lubricated with white lithium grease, while the springs will require a silicone-based spray. The springs are under a lot of tension and can pose a safety hazard, so don’t be afraid to contact a professional to inspect or replace them safely.

For more information on garage door repairs or any of your garage door repairs, please follow us on Facebook or Twitter or feel free to contact us!